I use smart things and create a rutine. When I open the fgarage door it sets the color of the night light to red. That works fine
I then set the CLOSE routine to turn off the light, it also works fine. However I really want the color to change to white when the door closes
that is, I want a white light all the time, except when garage door is opened.
The changing of color does not work
Anyone help?
What a very creative way to use it! ThirdReality hopes to bring you reality-based Smart Home! I want to confirm the requirements and equipment with you: Equipment: Are you using Smart Color Night Light (Matter WiFi Verison) or Multi Function Night Light (Zigbee Verison)? Your needs: 1. You want the white light to be on all the time; 2. The red light turns on when the garage door is opened; 3. When the garage door is closed, the white light will turn on; 4. Set up routine through SmartThings platform; If my understanding is correct, regardless of which device you are using,Then there are a few things you can do: 1. Control the light On (if you use Matter Night Light&Device Version is 1.00.43, please be careful NOT To enable Local Routine Night Light Mode; if you use Zigbee Verison, please be careful NOT To enable Local Routine Night Light Mode as well) 2. Set Routine: When Door Open then Light Turn on&Set Color Red 3. Set up Routine: When Door Close then Light Turn On&Set Color White We have tried this regimen and both products were successful. TroubleShooting: 1. Matter version night light SmartThings is officially supported, as long as your corresponding Driver version is 20240326 or above. Zigbee version night light support is required to use the Driver we provide, you can install it through the link (https://bestow-regional.api.smartthings.com/invite/adMKr50EXzj9) 2. You can Enable/Disable LocalRoutine by clicking the button; After clicking, the red light turns on to indicate Disable LocalRoutine;the green light means Enable LocalRoutine; If you have any questions please feel free to contact us!